To setup KeepKey integration with Electrum, here are the following steps:


I. Install Electrum

  1. Open Terminal
  2. Enter following command - sudo apt-get install python-qt4 python-pip
  3. Enter following command - sudo pip install https://download.electrum.org/2.6.4/Electrum-2.6.4.tar.gz

II. Install KeepKey Client
  1. Open Terminal
  2. Enter following command - sudo apt-get install python-dev python-setuptools cython libusb-1.0.0-dev libudev-dev git
  3. Enter following command - sudo pip install keepkey


III. Ubuntu (Linux) Permissions
  1. Open Terminal
  2. Enter following command - sudo wget https://raw.githubusercontent.com/keepkey/chrome-proxy/master/51-KeepKey.rules
  3. Enter following command - sudo mv 51-KeepKey.rules /lib/udev/rules.d/
  4. Reboot